Table of Contents
Advertisement
2.2
Detaching the arm/stand
(for VESA wall mount)
The detachable stand of the VW196(x)L Series LCD monitor is specially
designed for VESA wall mount.
To detach the arm/stand:
.
L ower the monitor to its lowest height, and then inset the monitor height
adjustment lock.
2. Have the front of the monitor face down on a table.
3. Use a screwdriver to remove the two screws on the VESA cover,
the slide out the arm/base to detach it from the monitor.
•
•
The VESA wall mount kit (00 mm x 00 mm) is purchased separately.
For use only with UL Listed Wall Mount Bracket with minimum weight/load 18.4 kg
(Screw size: 4 mm x 12 mm).
2-2
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the stand of the monitor when you remove the screws.
Chapter 2: Setup
Advertisement
Table of Contents
