Fig. 32: Fitting The Bellows; Table 30: Tightening Torques (Filter Silencer Screws) - ABB XAC24782 Operation Manual

Operation Manual / A100-L
9 Disassembly and assembly / 9.4 Disassembly and assembly of the fil-
ter silencer casing
Fit the circumferential part (09) with the screws.
u
Screws for fastening the individual parts to
the filter silencer
M10
30 Nm
Table 30: Tightening torques (filter silencer screws)
Tighten all screws of the bottom parts (01) and (02).
u
Tighten all screws of the side parts (03, 04, 07, 08) and the flanges (10, 11).
u
Tighten all screws of the circumferential parts (05, 06, 09).
u
Bellows
Fig. 32: Fitting the bellows
Fit bellows (C) with frame (F), screws (S) and nuts (N) on the filter silencer casing.
u
© Copyright 2021 ABB. All rights reserved.
Screws for fastening the individual parts
HZTL4034_EN
M8
25 Nm
Rev.T December 2021