Hyundai H-SF16-F1601 Instruction Manual page 6

GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS

Important safeguards. read carefully and keep for future reference.

Incorrect operation and improper handling can lead to malfunction of the
appliance and injuries to the user.

Before connecting the appliance for the first time check that voltage
indicated on the rating label corresponds to the mains voltage in your
home.

For home use only. Do not use for industrial purposes. Do not use the
appliance for any other purposes than described in this instruction manual.

Do not use outdoors or in damp area.

The appliance is not intended for use for physically, sensory or mental
disabled person (including children) or for person with lack of life
experience or knowledge, if only they are under supervision or have been
instructed about the use of the unit by responsible person.

Children must be under control in order not to be allowed to play with the
appliance.

Always unplug the appliance from the power supply before cleaning and
when not in use.

To prevent risk of electric shock and fire, do not immerse the appliance in
water or any other liquids. If it has happened DO NOT TOUCH the
appliance, unplug it immediately and check in a service center.

Do not use the device in bathrooms and near water.

Do not place the appliance near heat sources.

Do not leave the appliance switched on when not in use.

Do not use other attachments than those supplied.

In case of power cord is damaged, its replacement should be done by the
manufacture or service department or the other high-skill person to avoid
any danger.

Keep the cord away from sharp edges and hot surfaces.

Do not pull, twist, or wrap the power cord around the appliance.

Avoid contact with moving parts of the device. Do not put pencils or other
objects through the protective grid of the fan.

Do not operate without fan installed protective grid.

Do not attempt to repair, adjust or replace parts in the appliance. Repair
the malfunctioning appliance in the nearest service center.
 If the product has been exposed to temperatures below 0ºC for some time
it should be kept at room temperature for at least 2 hours before turning it
on.

The manufacturer reserves the right to introduce minor changes into the
product design without prior notice, unless such changes influence
significantly the product safety, performance, and functions.

Manufacturing date is indicated on the unit and/or on packing as well as in
accompanying documents in the following format XX.XXXX where first two
6