Removing The Nozzle Ring - ABB HT562580 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H..
8 Dismantling and fitting
8.9

Removing the nozzle ring

Figure 38: Removing the nozzle ring
1. Place the fastening strips (51002) under the nozzle ring.
2. Pull out the nozzle ring (56001) with the two extraction devices (90070) and the service
support base (90012).
3. Remove the lamellar sealing ring (56005).
4. Remove the burst ring (57210).
© Copyright 2015 ABB. All rights reserved. HZTL4030_EN
Page 85 / 115
Revision C September 2015