Table of Contents
Advertisement
Channel - Memorizing the Channels
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
are memorized, use the CH
and CH
through the channels.
This eliminates the need to change channels by entering the
channel digits. There are three steps for memorizing channels:
"Air/Cable", "Auto Program" and "Add/Delete".
Air/Cable
Before your TV can begin
TV
memorizing the available
Air/Cable
Auto Program
channels, you must specify
Add/Delete
Fine Tune
the type of signal source
Channel Grouping
that is connected to the TV
(i.e., an antenna or a cable
system). Select "Air" or
Move
"Cable" by pressing the ◄/►
button.
Auto Program
All available channels are
automatically stored in
Air 3
memory when channels are
selected by the direct tuning
function.
Enter
Press the ENTEr button
at any time to interrupt the
memorization process.
Add/Delete
You can add or delete
TV
a channel to display the
▲ More
P 3 : Added
channels you want only. To
P 4 : Deleted
use the "Add/Delete" function,
P 5 : Deleted
P 6 : Deleted
first run Auto Program.
P 7 : Deleted
Select "Deleted" or "Added"
▼ More
by pressing the ENTEr
Move
button.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
buttons to scan
store operation. If however the signal is weak or distorted, you
may have to fine-tune the channel manually.
Adjust the fine tuning by pressing
the ◄ or ► button.
To store the fine tuning setting
in the TV's memory, press the
ENTEr button.
Channel
To reset the fine tuning to "0",
: Air
►
select "Reset" by pressing the
►
►
▲ or ▼ button, then press the ENTEr button.
►
►
Adjust
Return
Search
3%
Stop
Return
r.SUrF Feature
This feature allows you to set
Add/Delete
the TV to return to a particular
channel after a certain amount of
time. For example, you may be
watching a channel when
commercials start. You can press
ToolS button to enter r.SUrF
Enter
Return
to set the r.SUrF to "5 minutes",
then switch channels. After
minutes, the TV will return to the original channel.
Press the ENTEr button on the remote control to set the timer
in thirty second intervals, up to five minutes.
Fine Tune
P 3
0
Reset
Move
Save
Adjust
Return
(depending on the model)
Surf
00: 29
English - 4
Channel - Channel Grouping
You can choose your category
TV
and find your desired channel
Group Select
Set Channel Group
in a few seconds. You can save
a channel under the following
categories: Movie, Music, News,
Sport, and User.
Move
Method:
Set Channel Group
▲/▼ : Used to select a
Movie Music News Sport User
P 3
Programme.
P 4
P 5
◄/► : Used to select the desired
P 6
P 7
channel group.
P 8
P 9
▲/▼ : Used to confirm the new
P 10
choice.
Move
➢
You can press ToolS button
and enter EasyView to use this function.
Channel Grouping
: A11
►
►
Adjust
Return
Adjust
Return
Advertisement
Table of Contents
