Advertisement
SUPER CLIP XTP / TOOL TIPS
CORDED USE
To use the clipper connected to mains power:
• Ensure your new tool is switched off.
• Insert the small plug on the charging adaptor into the socket on the bottom
of your new tool.
• Plug the charging adaptor into a suitable mains power socket and switch on.
• The red LED charging light will flash when the adapter is correctly inserted
into the appliance and connected to an outlet
• Switch the clipper on – NOTE – if the battery is weak and low on battery
charge, wait approx. 1min before switching the clipper on.
NOTE: The clipper should not be used for longer than 20 minutes when operated
with the cord.
8
Advertisement
