Midea MT18DDSCR1RCM User Manual page 11

2. Remove the hole cover and the right top hinge cover, then unscrew
screws and remove the right top hinge. Keep the screws to reuse.
3. Lift the freezer door up and away from your refrigerator.
Unscrew screws of middle hinge, remove the hinge, then lift the
4.
refrigerator door up and away from your refrigerator. Save the screws
to reuse.
Unscrew screws of the bottom hinge, then remove the bottom hinge
5.
from the bottom right side of the refrigerator.
6. Unscrew the hinge shaft from the right side of the bottom hinge and
move it to the left side, then secure the bottom hinge to the bottom
left side of the refrigerator, using the screws you removed previously.
Reattach the bottom hinge
Hinge shaft
7. Remove the sleeves from the top right of doors and hole cap from top
left of doors, and assemble them on the opposite sides.
Hole cover
Right top hinge cover
Center hinge
Remove the bottom hinge
Hinge shaft
11