Mitsubishi Electric UL7400U Manual page 34

Menu operation (continued)
FEATURE menu
FEATURE
A
Ë
ITEM
ASPECT
SCREEN
PROJECTOR ID
PASSWORD FUNCTION DISPLAY INPUT
MENU POSITION
CINEMA MODE
FILTER MENU
AUTO ROLL UP
PERIOD
MANUAL ROLL UP
REMAINING FILTERS **
FILTER USAGE TIME ****H
FILTER RESET
LANGUAGE
HIGH ALTITUDE MODE
opt.
ASPECT NORMAL
SCREEN 16:10
PROJECTOR ID
ALL
PASSWORD FUNCTION
DISPLAY INPUT
MENU POSITION 1.
CINEMA MODE
AUTO
FILTER MENU
ENTER
LANGUAGE English
HIGH ALTITUDE MODE STANDARD
ADVANCED MENU ENTER
RESET ALL OK
SETTING
NORMAL
16:9
REAL
FULL
16:10
16:9
ALL
01 to 63
/
MENU ACCESS /
SPLASH ID SCREEN
1 (upper left) /
2 (lower right) / 3 (center)
AUTO
FILM
VIDEO
ENTER
OFF / EVERY 500H /
EVERY 750H / EVERY 1000H
OK
OK
/ English / Español /
Deutsch / Français / Italiano /
/ / /
PORTUGUÊS / SVENSKA /
POLSKI / Nederlands/ Norsk /
ภาษาไทย
/ Türkçe /
Bahasa Indonesia / Melayu /
STANDARD
HIGH ALTITUDE
opt.
FEATURE
ADVANCED MENU
VIDEO SIGNAL
SETUP
SCART INPUT
LAMP WARNING
HIDE OSD
FUNCTION
Input video signal is displayed at the max height (1200 pixels)
or max width (1920 pixels) of the panel while its aspect ratio is
maintained.
• When SCREEN is 16:9, the input video signal is displayed at the
max height (1080 pixels) or max width (1920 pixels) of the panel.
Regardless of the type of input signal, image is displayed at 16:9
aspect ratio (1920 x 1080 pixels). Select to expand squeezed (or
horizontally compressed) images such as DVD images to 16:9.
Press the ENTER button to select whether or not to display signals
at 16:9 depending on their type. (See page 24.)
Input video signal is displayed at its original pixel size.
Select to project images in full size (1920 x 1200 pixels) irrespective
of type of input signal.
• When SCREEN is 16:9, images are displayed at 1920x1080
pixels.
Select this setting when using a 16:10 screen.
Select this setting when using a 16:9 screen.
Select this option to control the projector regardless of the ID
number. (See page 10.)
Use to set the ID number (two-digit number). (See page 10.)
Use to enable or cancel the password lock. See page 49 for details.
Use to change the position of the menu.
The film mode will be automatically activated when a film source
signal is input.
Select AUTO for normal use.
When flicker occurs on the screen, frame dropping or other incorrect
display occurs, or jaggies on slanting lines are remarkable, select
either FILM or VIDEO, which improves the symptom better.
Fixed to the film mode.
The film mode will not be activated.
The filter menu for the following settings is displayed.
You can set the roll interval of the filter. (See page 56.)
Select this option to roll the filter immediately. (See page 56.)
The remaining amount of the filter sheet is displayed.
The usage time of the current filter sheet is displayed.
Use to reset the roll counter of the filter.
Use to select the language used in the menus.
/
Select this option for normal use.
Select this option for use at an altitude of 1500 to 2700 meters
above the sea level.
EN-34
AUTO
AUTO
OFF
STANDARD
OFF