Advertisement
4.6. Reversing The Doors
The door opening can be reversed from "right hand hinged" to "left hand hinged"
if required.
Warning! When reversing the door, the appliance must not be connected
to the mains. Remove the plug from the mains beforehand.
Top Hinge Assembly
-
Remove the screws and upper-hinge assembly then lift and remove the
freezer door away from the middle hinge assembly.
-
Now remove the hinge pin from the upper hinge, turn the hinge over and
refit the pin into the same hole.
-
Remove the screws and middle hinge assembly then lift the fridge door
away from the lower hinge assembly.
-
Remove the screws, lower hinge and foot assembly. Now remove the
hinge pin from the lower hinge, turn the hinge over and refit the pin into
the same hole.
-
Remove the left foot and refit on the right-hand side.
-
Now fit the lower hinge and foot assembly to the left-hand side. Tighten
the screws.
-
Place the fridge door onto the lower hinge and then refit the middle hinge
into the pre-drilled holes on the left-hand side of the cabinet. Tighten the
screws.
-
Now place the freezer door onto the middle hinge and then refit the upper
hinge into the pre-drilled holes on the left-hand side of the cabinet.
Tighten the screws.
-
Ensure that both doors are correctly aligned and that they seal correctly.
If the doors require further alignment, slacken off the screws, re-align the
doors then tighten the screws.
Left Foot
Lower Hinge and Foot Assembly
14
Middle
Hinge
Assembly
Advertisement
