Operating the Monitor
4. In the Custom Scaling menu, use the OSD up and down
buttons on the front panel to select and highlight the desired
display format:
❏ One to One — The image is not stretched or altered, but
❏ Fill to Screen — This display format adjusts the
4–16
it may appear smaller than the active viewing area. Black
borders may appear at the edge of the display,
depending on the resolution setting. When custom scaling
is set to One to One, the Sharpness selection is disabled.
horizontal and vertical size of the image to fill the screen.
Aspect ratio is not preserved, so the image appears
stretched. There are no black borders at the edge of
the display.
User's Guide