Using The Onscreen Display - HP Pavilion F2105 User Manual

Using the Onscreen Display

1. If the monitor is not already on, press the Power switch (
turn on the monitor.
2. To access the OSD menu, press the Menu button (
OSD Main Menu displays.
Auto Adjustment appears for VGA (analog) connections only.
3. To access the Advanced OSD menu, press the Menu button
again. The OSD Advanced Menu displays. See "Adjusting
Monitor Settings" in this chapter for more information.
4. To navigate through the Main or Advanced OSD menu, press
the + (Plus) button (E) on the monitor's front panel to scroll up,
or the – (Minus) button (D) to scroll in reverse. Then press the
Auto/Select button (F) to select the highlighted function.
❏ The menu moves to the top if you scroll down at the bottom
5. To adjust the scale of a selected item, press the + or – buttons.
6. Select Save and Return.
❏ If you don't want to save the setting, select Cancel from
7. Press the Menu button to exit the OSD.
✎
If the buttons remain untouched for 30 seconds (factory default)
while displaying a menu, new adjustments and settings (except for
brightness and contrast) revert to previous settings. The menu then
closes.
User's Guide
of the selections. The menu moves to the bottom if you
scroll up at the top of the selections.
the Advanced Menu or Exit from the Main Menu.
Operating the Monitor
) to
G
). The
C
4–7