HP LP1965 User Manual page 23

3. Mount the Quick Release to a swing arm or other mounting fixture using the four screws removed
from the Quick Release in the previous step.
Figure 3-16
CAUTION:
It is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall, HP
recommends that you consult with a qualified engineering, architectural, or construction
professional to determine the appropriate type and quantity of mounting fasteners required for your
application and to ensure that the mounting solution is properly installed to support applied loads.
4. Insert the monitor panel into the Quick Release, and then press down firmly on the monitor to lock
it in place. When the Quick Release locks, it will make a clicking sound.
Figure 3-17
ENWW
Installing the Quick Release
The Quick Release can also be installed directly to a wall to mount the monitor panel.
Inserting the Monitor Panel into the Quick Release
Removing the Monitor Pedestal Base 15