Advertisement
Y
our lift chair will require routine maintenance checks. You can perform some
of these checks, while others may require assistance from a provider. By
following these maintenance checks, you can make sure your lift chair gives
you years of trouble-free operation. If you have any questions or concerns
regarding your lift chair's care and maintenance, contact your provider.
9 Before cleaning your lift chair, consult your provider for the proper types
of cleaner and cleaning methods.
9 Keep all electrical components free from moisture and liquid spills.
Intended for indoor use only.
9 Periodically inspect all wiring harnesses to make sure they are not cut,
damaged, frayed, or disconnected. If damage of any type is present,
unplug the lift chair and contact your provider.
9 Periodically check all fasteners for tightness, wear, and corrosion. If any
of these are present, unplug the lift chair and contact your provider.
Warning: Be careful of pinch points and sharp metal parts (wear
gloves).
9 Replace the batteries after one use. Replace the batteries yearly, even if
they were not used. Batteries are intended for one use only!
PR535, PR632, PR735 and PR766
To move the hand control from one side to the other, follow the instructions
below.
1. Lift the bottom of outside back from the Velcro on the arm cross rail.
2. Remove the hand
control wire from the
J-Clip.
3. Unlock the extension
wire, and separate.
Note: This step
disables all lift chair
functions.
4. Route the hand control
wire through the
opposite J-Clip.
5. Reconnect the
extension wire, and
lock to secure.
CARE AND MAINTENANCE
Hand Control Inside Arm Routing
J-Clip
P-Clip
Extension
22
Lock
Hand Control
J-Clip
Advertisement
