Speaker Connection; Specification General - Pyramid CDR31FD Instruction Manual

SPEAKER CONNECTION

Speaker connection
ANTENNA PLUG
NOTE:
In spite of having any kinds of speaker system ,must use 4 ohms
impedance of speaker to reduce the distortion during high volume
level.
SPECIFICATION
GENERAL
Power requirement------------------------------DC 13.8V negative ground
Current consumption---------------------------------------------------3A MAX.
Maximum output power-------------------------------------------2 x 50 Watts
FM SECTION
Frequency range----------------------------------------------88MHz-108MHz
Usable sensitivity-----------------------------------------------------------10uV.
IF Frequency-----------------------------------------------------------10.7MHz
AM SECTION
Frequency range--------------------------------------------540KHz-1600KHz
LINE -OUT
Output-----------------------------------------250mV@FM10%THD POWER.
Impedance---------------------------------------------------------------600ohm.
CD PLAYER
System-----------------------------------------compact disc audio system.
Usable disc-------------------------------------------------------compact disc.
Signal to noise radio -------------------------70dB[1KHz] [IEC-A net work].
Chassis dimensions---------------------------------183[W]X53[H]X160[D].
WHITE (L)
RCA LINE OUT PLUG
RED (R)
3A
POWER SUPPLY
FUSE
AUTO ANTENNA YELLOW
+GREEN
L
-GREEN/WHITE
RED
6
BLACK GROUND
GREY+
R
GREY/WHITE-