Settings - Oregon Scientific RAR213HG User Manual

5. Tap on each channel to rename it. (Up to 0
characters including space are allowed). Tap
if completed. Tap to exit.
To remove sensor:
To remove any sensor from the weather station, Tap
Remove station on STATIoN
screen, all the sensors will be
removed at the same time.
To reposition the sensors on
screen:
1. On STATIoN screen, tap
. Press and hold at the
right side of a sensor. Drag it
to your desired position.
3. Tap to confirm.

SETTINGS

You can set your weather station through the
application, such as measurement units.
The settings are as follows:
• Temperature
• Barometric (with optional BTH sensor)
• Rainfall (not available in RAR13HG)
• Wind speed (not available in RAR13HG)
• Altitude (not available in RAR13HG)
• Show unavailable sensor
.
8
• Automatically sync time
• Show sea level pressure (not available in RAR13HG)
To select the measurement unit:
1. Tap to view the measurement unit options.
. Tap on your desired unit.
3. Tap to go back to the previous screen.