Table of Contents
Advertisement
ALERT CODES
ALERT CODE
A1
A2
A3
F
+ number
44
POSSIBLE CAUSES
The oven has overheated.
Door lock error: the door
cannot be locked after you
have started a pyrolysis
cycle.
Door lock error: the door
cannot be unlocked after a
pyrolysis cycle has finished.
Technical fault.
WHAT TO DO
1.
Allow the oven to cool down.
2.
Once the oven has cooled down
and the door has unlocked, the
alert code will disappear. You can
now use the oven again.
1.
Turn the power to the oven off at
the wall and on again.
2.
Wait approximately 10 seconds.
This is to allow the door lock to
return to its initial position.
3.
Set the clock. See 'Setting the
clock and first use' for instructions.
4.
Try starting a pyrolysis cycle again,
making sure that you close the door
firmly. See 'Using the pyrolysis
cycle'.
1.
Turn the power to the oven off at
the wall and on again.
2.
Try touching on the oven door to
help the door lock disengage.
3.
If this doesn't help and the
alert code reappears, call your
Authorised Repairer or Customer
Care.
1.
Note down the alert code.
2.
Wait until the cooling fans have
stopped
and
completely cooled down.
3.
Turn the power to the oven off at
the wall.
4.
Call your Authorised Repairer or
Customer Care with the alert code
information.
the
oven
has
Advertisement
Table of Contents
