Advertisement
All manuals and user guides at all-guides.com
SAFE USE OF THE IRON
Your safety and the safety of others are very important
We providethe important safety messages in this manual.
Always read and obey all safety messages.
This is the safety alert symbol. It is used to alert you
to potential hazards that can kill or injure you and others.
IMPORTANT SAFETY INSTRUCTIONS
Your iron is an appliance to be used only for ironing
fabrics on an ironing board.
To reduce the risk of burns, electric shock, fire, or injury to
persons, when using your iron, basic safety precautions
should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THE IRON
1. Use the iron only for its intended purpose, for ironing
fabrics on ironing board.
2. To protect against burns or injury to persons, do not
iron or steam fabrics while being worn on the body.
3. The iron should always be turned "OFF" before
plugging or unplugging from outlet. Never yank cord to
disconnect from outlet, instead, grasp plug and pull to
disconnect.
4. Do not allow cord to touch hot surface. Allow the iron to
cool completely before storing.Retract cord into cord
reel unit when storing
5. Always disconnect iron from electrical outlet when filling
or emptying water and when not in use.
6. To avoid risk of electric shock, do not operate iron with
a damaged cord or if the iron has been dropped or
damaged. Do not disassemble the iron. Incorrect
reassembly can cause a risk of electric shock when the
iron is used. For repair, take it to a qualified serviceman.
7. Close supervision is necessary for this appliance being
used by or near children. Do not leave iron unattended
while connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot
water, or steam. Hot water may leak from the iron. Use
caution when filling or turning the steam iron upside down.
9. To protect against burns or injury to persons, do not
direct steam toward the body when ironing. The iron
must be used and rested on a stable surface. When
placing the iron on its stand, ensure that the surface on
which the stand is placed is stable.
01
Advertisement
