Page 1
Instruction Manual CORDLESS/CORDED STEAM IRON EL-IR100-22 Please read this instruction manual before use of this iron. This iron has many functions such as temperature regulating, spraying, dry ironing, variable steam, bursting steam, etc. This iron can be used as a corded as well as a cordless iron.
SAFE USE OF THE IRON Your safety and the safety of others are very important We providethe important safety messages in this manual. Always read and obey all safety messages. This is the safety alert symbol. It is used to alert you to potential hazards that can kill or injure you and others.
Page 3
To reduce the risk of electric shock or fire Do not operate another high wattage appliance on the same circuit, to avoid a circuit overload. If any extension cord is absolutely necessary, use a cord rated a minimum of 10 amperes. Cord rated for less amperage may overheat, and should not be used.
Technical specifications Corded ironing mode: 1. Set the position switch to position (fig3). 2. Take the iron (attached with the power unit) from the power base (fig4). 3. Always place the iron (with power unit) back on the stand when you stop ironing. Cordless ironing mode: 1.
How to fill water: Make sure the iron is turned off and the AC Power Cord is unplugged from the electrical outlet. The iron can be filled with the Detachable Water Tank in place or removed. Set the Cord Switch to “Cordless” Remove the iron from the stand.
Smart auto-stop feature for the maximum safety: The built-in smart IC controller will automatically switch off the iron if it detects no movement for 30 seconds in horizontal position and 8 minutes in vertical position Once it is activated the auto shut off indicator will flash. To restart the iron, pick up the iron or move it slightly, then the auto shut off indicator goes out and the power lamp will be on to indicate the iron is ready for use.
Page 7
Storage: After using, unplug the power plug from the socket. Turn the steam control to minimum and pour out the remaining water from the water tank. Turn the temperature control to “min”, place the iron back on the power base to cool down. Set the position switch to storage position (fig 1) to lock altogether.
Need help?
Do you have a question about the EL-IR100-22 and is the answer not in the manual?
Questions and answers