MT-1353 TECHNICAL SAFETY Ensure that the connection data on the data plate (voltage and frequency) match the mains electricity supply. It is essential that they match to avoid damage to the appliance. Before using the vacuum cleaner, check for any signs of damage. Do not use a damaged appliance: It could be dangerous.
MT-1353 PREPARATION Let the end of the hose insert into the air intake socket and turn clockwise until clicking position. After using, turn the hose socket anti clockwise and pull it out. Fit the extension tube to the handle, tube and tube to floor brush as showing in the picture USING THE VACUUM CLEANER Pull out the wire to suitable length;...
MT-1353 REPLACING THE DUST-CUP When the dust reach to the 1/4 level in the dust-cup, it means dust-cup is full. At this moment, dust-cup should be emptied and the filter should be washed. Open the dust-cup as showing in the picture.
Page 16
MT-1353 220-240 V, 50 Hz 2200 W 3,4 / 4 kg 408 X 279 X 308 mm , 4- , 6- COSMOS FAR VIEW INTERNATIONAL LIMITED ROOM 701, 16 APT, LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA...
Need help?
Do you have a question about the MT-1353 and is the answer not in the manual?
Questions and answers