Table of Contents
Advertisement
Camera Management
4.1 Add/Edit Camera
4.1.1 Add Camera
The network of the NVR should be set before adding IP camera (see 11.1.1 TCP/IP
Configuration for details).
Refer to the pictures below. Click Add Camera in the setup panel or
corner of the preview window to pop up the "Add Camera" window as shown below. You can
quickly add or add the IP camera manually.
Quickly Add
Check the cameras and then click "Add" to add cameras. Click
address, username and password and so on. Click "Default Password" to set the default
username and password of each camera.
4 Camera Management
27
NVR User Manual
in the top right
to edit the camera's IP
Advertisement
Table of Contents
