Table of Contents
Advertisement
APPENDIX > Mounting the sound bar on a wall
3
Remove the mounting template from the wall.
4
Install screws (sold separately) at the points marked on the wall.
Be sure to use screws of the following size.
7 to 9 mm in diameter
5
Peel off the backing paper from the spacers (supplied), and attach the adhesive
face of each spacer to the bottom of the sound bar.
6
Connect cables to the sound bar.
7
Hang the sound bar on the screws.
457 mm
13 to 15 mm
Spacers
Sound bar screw-hanging holes
Controls
90
4 to 5 mm
20 mm or more
Advertisement
Table of Contents
