Ryobi RY18CVA Manual page 4

■
Maintain power tools and accessories.
Check for misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
■
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier
to control.
■
Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the
power tool for operations different from those
intended could result in a hazardous situation.
■
Keep handles and grasping surfaces dry,
clean and free from oil and grease. Slippery
handles and grasping surfaces do not allow
for safe handling and control of the tool in
unexpected situations.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by
the manufacturer. A charger that is suitable
for one type of battery pack may create a risk
of fire when used with another battery pack.
■
Use power tools only with specifically designated
battery packs. Use of any other battery packs
may create a risk of injury and fire.
■
When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
■
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
■
Do not use a battery pack or tool that
is damaged or modified. Damaged or
modified batteries may exhibit unpredictable
behaviour resulting in fire, explosion or risk
of injury.
4
Original Instructions
■
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130°C may cause explosion.
■
Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
SERVICE
■
Have your product serviced by a qualified
repair person
replacement parts. This will ensure that the
safety of the product is maintained.
■
Never service damaged battery packs.
Service of battery packs should only
be performed by the manufacturer or
authorised service providers.
CULTIVATOR SAFETY WARNINGS
■
Use the product across the face of slopes;
never up and down. Exercise extreme
caution when changing direction on slopes.
■
Exercise extreme caution when reversing or
pulling the product towards you.
■
Never pick up or carry the product while the
motor is running.
■
Use the product only in daylight or with
good artificial light.
■
Keep proper footing and balance at all
times, especially on slopes. Walk, never
run.
■
Do not use the product near drop-offs,
ditches, excessively steep slopes, or
embankments. Poor footing could cause a
slip-and-fall accident.
■
Avoid working the soil when soggy or wet.
Wait a day or two after heavy rain for the
ground to dry.
■
Keep hands and feet away from the rotating
tines at all times and especially when
turning on the motor.
■
Turn off the product, and remove the battery
pack. Make sure that all moving parts have
come to a complete stop:
●
before leaving the product unattended
●
before cleaning the product or clearing a
blockage
●
before checking for any damage after
hitting an object
using only identical