Samsung ML-2851ND/SEE Service Manual page 90

3) JAM 1
Description: 1. Recording paper is jammed in front of or inside the fuser.
2. Recording paper is stuck in the discharge roller and in the fuser just after passing through the
Actuator-Feed.
1. If the recording paper is jammed in
front of or inside the fuser.
2. If the recording paper is
stuck in the discharge roller and the
fuser just after passing through the
Actuator-Feed, Feed Actuator
Service Manual
Alignment & Troubleshooting
may be defective.
Replace the SMPS or Exit-Sensor.
1. Replace the Main PBA.
2. Reassemble the Actuator-Feed
and Spring-Actuator if the
movement is bad.
4-40
Samsung Electronics