Wireless Lan/Bluetooth Wireless Components; Switching The Wireless Components On And Off; Configuring Wlan Access; Further Information On Wlan And Bluetooth - Fujitsu LIFEBOOK U939 Operating Manual

Wireless LAN/Bluetooth wireless components

The installation of wireless components not approved by Fujitsu will
invalidate the certifications issued for this device.
This computer uses an Intel® Wireless AC 9560 module. According to Intel®, this
module supports 256-bit AES-GCMP encryption. Full support depends on the general
industrial availability of operating systems with WPA3 Enterprise and associated support.

Switching the wireless components on and off

► Press the key to change the wireless components mode.
Bluetooth WirelessLAN Bluetooth WirelessLAN
The wireless indicator will illuminate when one or more wireless components are switched on.
When you turn off the radio components, the wireless LAN antenna
and the Bluetooth module are turned off.
You can turn the installed radio components on and off individually
using the radio components settings.
Observe the additional safety instructions for devices with wireless components
in the section
Details on using a wireless LAN can be found in the online help system
included in the wireless LAN software.
For more information on using Bluetooth, see the information
accompanying the Bluetooth device.
Configuring WLAN access
• Requirement: A WLAN is available and you have the necessary access data on hand.
Information on configuring WLAN access can be found in the
documentation for your operating system.

Further information on WLAN and Bluetooth

For further information about WLAN or Bluetooth, please refer to the
appendix of this Operating Manual.
For WLAN specifications, see chapter
Fujitsu
"Important notes", Page
"WLAN specifications", Page
Working with the notebook
13.
70.
39