Page 2
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING,...
Page 3
Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Page 4
Cautions Fire Prevention No naked flame sources, such as lighted candles, should be placed on the equipment. Input voltage should meet both the SELV (Safety Extra Low Voltage) and the Limited Power Source with 5 VDC according to the IEC60950-1, or the power level PS2 with 5 VDC according to the IEC62368-1 standard.
Installation The device can be adjusted as follows:...
Page 8
You can clamp the device on the display, or install the device to the tripod.
Page 9
* The tripod shall be purchased separately. * It is recommended to peel off the protective film before using.
Page 10
Question: The device is plugged in but the preview software (for example, AMCap 3.0.9) does not show preview image. Answer: Open Device Manager to check if the web camera is recognized. If not, check whether the device is turned on, or plug the camera in another USB port.