Image Shape
Correcting the Image Shape with Quick Corner
You can use the projector's Quick Corner setting to correct the shape and size
of an image that is unevenly rectangular.
a
Turn on the projector and display an image.
b
Press the
button on the remote control.
c
Select the Settings menu and press
.
d
Select Installation > Keystone and press
Select Quick Corner and press
e
You see the area selection screen.
f
Use the arrow buttons to select the corner of the image you want to
adjust. Then press
.
To reset the Quick Corner corrections, hold down
two seconds while the area selection screen is displayed, and then
a
select Yes.
g
Press the arrow buttons to adjust the image shape as necessary.
34
.
. Then press
again if necessary.
for about