Table of Contents
Advertisement
OPERATION
WARNING: To reduce the risk of serious personal injury,
lock the trigger switch and disconnect battery pack before
making any adjustments or removing/installing attachments
or accessories. An accidental start-up can cause injury.
Proper Hand Position (Fig. 2, 4)
WARNING: To reduce the risk of serious personal injury, ALWAYS
use proper hand position as shown.
WARNING: To reduce the risk of serious personal injury, ALWAYS
hold securely in anticipation of a sudden reaction.
Proper hand position requires one hand on the hand grip (I), with the
other hand on the main handle (H).
FIG. 4
Installing and Removing the Battery Pack
(Fig. 5)
WARNING: To reduce the risk of injury, never depress the battery
release button without removing the battery pack. Depressing the
battery release button without removing the battery pack can result
in the battery pack falling out unexpectedly.
NOTE: For best results, make sure your battery pack is fully charged.
To install the battery pack (J) into the tool handle, align the battery
pack with the rails inside the tool's handle and slide it into the handle
until the battery pack is firmly seated in the tool and ensure that it
does not disengage.
To remove the battery pack from the tool, press the release button (K)
and firmly pull the battery pack out of the tool handle. Insert it into the
charger as described in the charger section of this manual.
FIG. 5
Pivot Release Slider (Fig. 2, 6, 7)
WARNING: To avoid tool being turned on accidentally, make sure
the lock-off button (B) is engaged.
WARNING: To avoid being pinched, keep hands away from the
hinge when changing positions.
The tool can be converted into three different positions. To change
positions, slide the pivot release slider (C) to the right as shown
in Figure 6 and rotate the handle portion of the tool until it snaps
securely into any of the three positions shown in Figure 7.
10
K
J
Advertisement
Table of Contents
