Table of Contents
Advertisement
LCD
Conditioning
Reset Others
Factory Reset
NOTE: This monitor has a built-in feature to automatically calibrate the brightness
to compensate for LED aging.
OSD Warning Messages
When the monitor does not support a particular resolution mode, you will see the
following message:
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See
ranges addressable by this monitor. Recommended mode is 1920 x 1200.
You will see the following message before the DDC/CI function is disabled:
Helps reduce minor cases of image retention. Depending on the
degree of image retention, the program may take some time to run.
You can enable this feature by selecting Enable.
Reset all settings under the Others menu to the factory preset values.
Reset all settings to the factory preset values.
Monitor Specifications
for the Horizontal and Vertical frequency
Operating the Monitor
51
|
Advertisement
Table of Contents
