NEC MultiSync X554UNV User Manual page 44

Name Setting
Click "NAME" on the left side of HOME.
MONITOR NAME
HOST NAME
DOMAIN NAME
Network Password Setting
Click "NETWORK PASSWORD" on the left side of HOME.
PJLink PASSWORD Set a password for PJLink*. A password must be 32 characters or less. Do not forget your password.
However, if you forget your password, consult with your dealer.
HTTP PASSWORD Set a password for HTTP server. A password must be 10 characters or less.
HTTP PASSWORD HTTP PASSWORD is required when logging in HTTP server.
ENABLE Set a monitor name as USER NAME when inputting the password.
*What is PJLink?
PJLink is a standardization of protocol used for controlling devices of different manufacturers. This standard protocol is
established by Japan Business Machine and Information System Industries Association (JBMIA) in 2005.
The device supports all the commands of PJLink Class 1.
Setting of PJLink will not be affected even when [RESET] is done from the menu.
Set a monitor name. The name must be 16 characters or less. The default is model name.
Type in the hostname of the network connected to the monitor.
Up to 15 alphanumeric characters can be used.
Type in the domain name of the network connected to the monitor.
Up to 60 alphanumeric characters can be used.
English-42