Table of Contents
Advertisement
global_main.book.book Page 11 Tuesday, May 25, 2021 6:37 PM
• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
• The appliance must be positioned so that the
plug is easily accessible.
• Power outlet must be within 1 meter of either
side of the appliance.
WARNING
• Repairs to the appliance must only be carried out
by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or
serious malfunctioning. Contact your local
authorised LG repairer.
• The power plug must be plugged into an
appropriate outlet socket that is installed and
grounded/earthed in accordance with all local
codes and ordinances.
Stacking Mini Washer and
Main Washer
Needed Accessories
a
Back Brackets (2EA)
b
Machine Screw (13EA)
Short Sheet Metal Screw (5 EA)
c
d
Long Sheet Metal Screw (11 EA)
NOTE
• Accessories are subject to change by the
manufacturer without prior notice for product
improvement purposes.
INSTALLATION
Attaching Brackets on Mini
Washer
1
After removing the carton and shipping
material, lift the Mini Washer off the foam
base, and keep 2 brackets on the foam base.
• Make sure the plastic tub support comes off
with the base and is not stuck to the bottom
of the Mini Washer.
2
Remove and save the foam block for future
use.
• If the Mini Washer must be moved in the
future, the foam block will help prevent
damage to the Mini Washer during
transportation.
• To prevent damage, do not remove the foam
block until the Mini Washer is at the final
location.
3
Turn the top cover about 180 degrees, cover
the opening in the top with the top cover and
install 4 short sheet metal screw.
11
Advertisement
Table of Contents
