Page 1
ACA801 License Plate Mount Camera Installation Set-up Guide Part # ITEM PICTURE Camera + License 4360614 Plate Mount 4460036 Mounting Bracket 4060049 Screws 4060050 Screws 4120334 Power Cable Video RCA Cable 4120335 for Cameras 4280689 Manual...
Page 4
Your first priority while driving should always be the safe operation of your vehicle. VOXX Electronics Corporation will not accept any responsibility whatsoever for accidents resulting from failure to observe these precautions or safety instructions.
Page 5
Camera Installation: License Plate Mount 1. Remove the rear license plate. 2. Examine the vehicle to determine the best way to run the power wires to the reverse lights and the extension cable through the car. 3. The Camera can be mounted above or below the plate. (For surface mounting with the included bracket, see the next section.) Determine the mounting location that best suits your needs.
Page 6
Camera Installation: Surface Mount 1. Find a suitable location on the vehicle where the bracket will not interfere with any equipment or doors, or block the line of sight. Verify that the planned mounting location is accessible from behind and that you have access to route the wiring inside the vehicle. Be sure that the mounting screws will not hit any wires or equipment inside the vehicle .
Page 8
For customer or technical support please call Voxx Support: 1-800-645-4994 9 AM – 6 PM (EST - Eastern) Monday – Friday VOXX Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788 Patented www.voxxintl.com/company/patents...
Need help?
Do you have a question about the ACA801 and is the answer not in the manual?
Questions and answers