Honda CBR300R Manual page 65

8. Install the new oil filter with the OUT-
SIDE mark facing out.
9. Install the oil filter spring into the oil filter
cover, and then install the new gasket
and oil filter cover by tightening the oil
filter cover bolts.
Torque: 9 lbf·ft (12 N·m, 1.2 kgf·m).
10. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 18 lbf·ft (24 N·m, 2.4 kgf·m).
11. Fill the crankcase with the recommended
oil ( P. 42, 125) and install the oil fill cap.
2
Required oil
When changing oil & engine oil
filter:
1.6 US qt (1.5 liters)
When changing oil only:
1.5 US qt (1.4 liters)
Engine Oil Changing Engine Oil & Filter
u
12. Check the oil level.
13. Check that there are no oil leaks.
14. Install the right under fairing and right
middle fairing.
NOTICE
Improper installation of the oil filter can result in serious
damage to the engine.
Oil filter cover
Gasket
Oil filter cover bolts
P. 60
2
Spring
Oil filter
63