LG S5MB Owner's Manual page 24

OPERATION
24
NOTE
• Pants can be pressed while refreshing other
items in the same programme.
• To avoid double creases, run the strong course
with the moving hanger to remove any existing
knife pleats, and then use the pants press.
• For optimum results, use the extra pants care
programme which is designed for use with the
pants crease care feature. This programme can
be downloaded using the LG ThinQ and used as
the Downloaded programme.
1
Open the pants crease care by pressing on the
icon on the side.
2
Hang the pants hanger on the hook above the
pants crease care that best fits the length of
the pants being pressed.
• If the pants are longer, use the higher hooks
to keep the pants from hitting the floor of
a
the cabinet.
• Pants should be no wider than 96 cm or
longer than 110 cm. Check the size of the
pants before using the pants crease care. If
pants are too large, use the moving hanger.
3
Make sure the pants are hanging straight.
• Check the creases on the legs to make sure
they are lined up. Fix the pants with 2 clips
before closing the pants crease care. If the
pants legs are not aligned properly or the
pants are not hanging straight, double lines
may appear at the pants' edges, or the pants
may be wrinkled.
4
Close the pants crease care, then straighten
the pants once more.