LG S5MB Owner's Manual page 15

refrigerant may leak and cause the appliance to
malfunction.
1
Move the appliance into its final location using
the wheels at the bottom of the appliance.
2
Install the two rear levelling feet at the rear
bottom of the appliance.
• Tip the appliance, do not lay it down, to
install the levelling feet.
3
Level the unit following the instructions in
Levelling the appliance.
4
Install the four carpet spikes on the ends of the
levelling feet, with the shorter, octagonal faces
toward the front.
WARNING
• Take care when handling the carpet spikes. They
are designed to pierce through the carpet
backing and pad and are very sharp.
• Keep fingers and hands out from under the
spikes when setting the unit in place to avoid
personal injury or product damage.
5
Level the appliance once more after installing
the spikes.
• If the carpet has very deep pile or padding,
the front feet may need to be extended
slightly to install the drip tray.
Consider followings after installing the
appliance on carpeting.
• Be sure to check and empty the drip tray
often.
• Do not open the unit during operation to
avoid condensation forming on carpet
surface, which may result in surface mold or
mildew.
• Keep the bottom of the cabinet dry when
filling or emptying water tanks. Keep the
outside of the water tanks clean and dry to
discourage growth of mold or mildew.
Reversing the door
It is possible to reverse the direction of the door
swing. This should be done by the installer at the
time of installation, if desired.
NOTE
• If the direction of the door swing needs to be
changed after installation, contact the LG
Customer Information Centre.
Using Anti-Slip Sheets
Anti-slip sheets prevent the appliance from
shaking or shifting when opening or closing the
door.
1
Clean the floor to attach the anti-slip sheets.
• Use a dry rag to remove and clean foreign
objects or moisture. If moisture remains, the
anti-slip sheets may slip.
INSTALLATION
15