Manually Installing The Monitor Driver; Installing The Monitor Driver In Windows 7 - Lenovo Q27q-20 User Manual

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft
Windows 10�

Installing the monitor driver in Windows 7

To use the Plug and Play feature in Microsoft Windows 7, do the following:
1� Turn off the computer, all attached devices�
2� Ensure that the monitor is connected correctly�
3� Turn on the monitor and then the system unit� Allow your computer to start the Windows 7
operating system�
4� From the Lenovo website https://pcsupport.lenovo.com/solutions/q27q_20, find the
corresponding monitor driver and download it to a PC to which this monitor is connected (such
as a desktop)�
5� Open the Display Properties window by clicking Start, Control Panel and Hardware and
Sound icon� and then clicking the Display icon�
6� Click the Change the display settings tab�
7� Click the Advanced Settings icon�
Click the Monitor tab�
8�
Click the Properties button�
9�
10� Click the Driver tab�
11� Click Update Driver, then click Browse the computer to find the driver program.
12� Select Pick from the list of device driver program on the computer�
13� Click the Hard Disk button� By clicking the Browse button, browse and point to the following
path:
X:\Monitor Drivers\Windows 7
(where X indicates "the folder in which the downloaded driver is located" (such as a desktop))�
14� Select the "Q27q-20�inf" file and click the Open button� Click the OK button�
15� In the new window, select Q27q-20 and click Next�
16� After the installation is complete, delete all downloaded files and close all windows.
17� Restart the system� The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality�
Lenovo recommends using either 2560 x 1440 at a refresh rate of 75 Hz, or 1920 x 1080 at a
refresh rate of 60 Hz�
Chapter 3. 3-5