Using Voicestation™ 500 - Polycom VoiceStation 500 User Manual

5. Connect the other end of the short tele-
phone cable to a jack wired for a standard
analog phone line.
► Do not plug the VoiceStation™ 500 into a
digital telephone network. Doing so may
damage the phone.
6. Place VoiceStation™ 500 in the center of
the room on a flat, stable surface and press
the Volume Up and Volume Down buttons
to adjust the Ringer.
► The Ringer has three modes: High, Low,
and Off. The Ringer sounds when you
press the Volume buttons to indicate current
status.
7. Press the On/Off button to obtain a dial
tone.
► If you do not hear a dial tone, you may not
be connected to an analog telephone line.
For assistance, contact your System Admin-
istrator.
Using VoiceStation™ 500
The Polycom VoiceStation™ 500 sup-
®
ports three modes of operation:
• POTS Audio
• Bluetooth Audio (headset and hands-
free profile)
• 2.5mm Wired Audio
The Link Indicator will be slowly flashing
blue when the VoiceStation™ 500 is in
Bluetooth mode, and it will be solid amber
when the phone is in 2.5mm Wired Audio
►When the On/Off indicator light is on, the Volume
buttons control the sound level of the speaker.
►When the On/Off indicator light is off, the Volume
buttons control the ringer volume.
mode (with a cable connected). The Link
Indicator is off when the phone is in nor-
mal POTS mode.
When in POTS mode, inserting a 2.5mm
cable automatically enables the Wired
Audio mode, and the amber link indicator
will automatically come on. It is not pos-
sible to have a Bluetooth connection while
in the amber mode. Removing the 2.5mm
cable automatically reverts the VoiceSta-
tion™ 500 to POTS mode.
VoiceStation™ 500 - 5