2.1 POWER ON
Command "A00"[CR] (Hex: 41 30 30 0d)
Details
Return
2.2 POWER OFF (Power OFF immediately)
Command "A01"[CR] (Hex: 41 30 31 0d)
Details
Return
2.3 POWER OFF
Command "A02"[CR] (Hex: 41 30 32 0d)
Details
Return
2.4 Computer1
Command "A05"[CR] (Hex: 41 30 35 0d)
Details
Return
2.5 Computer 2
Command "A06"[CR] (Hex: 41 30 36 0d)
Details
Return
Downloaded From projector-manual.com ASK Manuals
Power on when projector standby
OK
NG
Power Off immediately
OK
NG
"Power off?" displays while send the command, just like press the "POWER"key.
OK
NG
Change the input to "Computer1".
OK
NG
When COMPUER IN 2/MONOTOR OUT ternima is used as COMPUTER IN 2,Change
the input to "Computer 2".
OK
NG
[ACK][CR]
"?" [CR]
[ACK][CR]
"?" [CR]
[ACK][CR]
"?" [CR]
[ACK][CR]
"?" [CR]
[ACK][CR]
"?" [CR]
Appendix
61