Watching Rgb Outputs - LG 42PM4MA Owner's Manual

4. Turn on power by pressing the power button on the product.
Turn on the PC.
5. Select an input signal.
Press the INPUT button on the remote control to select the input
signal.
INPUT D D / E E SET
a. When connecting with a D-Sub signal input cable.
• Select RGB : 15-pin D-Sub analog signal.
b. When connecting with a HDMI to DVI signal input cable.
• Select HDMI/DVI : HDMI to DVI Digital signal.
NOTES: • How to connect to two computers.
Connect the signal cables (HDMI to DVI and D-Sub) to each computer.
Press the INPUT button on the remote control to select the computer to use.
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
W atching RGB Outputs
W atching RGB Outputs
Use this function when displaying ANALOG RGB inputs of a PC to the other product.
• To use different products connected to each other Connect one end of the signal input cable(15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products.
15-pin D-Sub Signal Cable
PC
NOTES: • When multi-connecting in/out cascade format, cables to be less damaged are recommended.
We recommend that you should use cable distributor.
RGB
IN
OUT
Product 1 Product 2
Input
AV
Component1
Component2
RGB
HDMI/DVI
RGB RGB
IN IN
OUT OUT
Product 3
Installation
Input
AV
Component1
Component2
RGB
HDMI/DVI
RGB
IN
OUT
Product 4
Owner's Manual 13