LG 42PM4MA Owner's Manual page 10

Connection Options
Connection Options
- Here shown may be somewhat different from your set.
RS-232C
REMOTE
HDMI/DVI IN
CONTROL IN
(CONTROL&SERVICE)
OUT
IN
1 2 3
1. REMOTE CONTROL IN
2. RS-232C INPUT(CONTROL&SERVICE) PORT
OUT
For control the another set, connect a RS-232C Cable from
RS-232C out port to another set's RS-232C input port.
IN
Connect to the RS-232C port on a PC.
3. HDMI/DVI IN
Connect a HDMI signal to this jack. Or connect a DVI(Video)
signal.
4. RGB INPUT
Connect the set output connector from a PC to the
appropriate input port.
RGB OUTPUT
You can watch the RGB signal on another set, connect RGB
OUTPUT to another set's PC input port.
5. AUDIO (RGB/DVI)
Connect a PC Phone Cable.
6. COMPONENT INPUT 1-2
Connect a component video/audio device to these jacks.
Back Connection Panel
Back Connection Panel
COMPONENT IN
AUDIO
RGB
(RGB/DVI)
VIDEO
L-AUDIO-R
IN
1
OUT
2
4 6
5
AV IN EXTERNAL SPEAKER
VIDEO L-AUDIO-R
S-VIDEO
R L
AV
OUT
7
8
7. AV IN
Connect audio/video output from an external device to these
jacks.
S-VIDEO
Connect S-Video out from an S-VIDEO device.
AV OUT
Connect a AV Cable from AV(CVBS) out port to another
set's AV input port.
8. EXTERNAL SPEAKER (8 ohm output)
Connect to optional external speaker(s).
* For further information, refer to 'Speaker & Speaker
Stand' manual.
9. POWER CORD SOCKET
This set operates on an AC power. The voltage is indicated on
the Specifications page. Never attempt to operate the set on
DC power.
Introduction
AC IN
9
Owner's Manual 9