LG FV1413H2BA Owner's Manual page 37

global_main.book.book Page 37 Tuesday, July 13, 2021 9:18 AM
Using the ezDispense
Use the Dispenser 1 and Dispenser 2 buttons to
set up and control the ezDispense function.
Dispenser 1 button
a
Dispenser 2 button
b
c Liquid detergent indicator
d Link indicator (Using only liquid detergent both
compartments)
e Liquid fabric softener indicator
NOTE
• When the detergent or softener is insufficient;
- In case of pressing the Power button: The LED
will blink and the chime will sound.
- In case of running the appliance: The LED will
blink.
• The default settings are configured to dispense
the detergent of Dispenser 1 and the fabric
softener of Dispenser 2.
Changing Dispense Level for a Single
Load
1
Press the Power button.
2
Turn the knob to select the desired cycle.
3
Press the Dispenser 1 or Dispenser 2 button
to increase or decrease the dispensed amount
from the set defaults.
Buttons Indicator
*1 The default settings are configured to
dispense 42 ml of detergent and 30 ml of
softener for 4-6 kg of normally soiled
laundry.
4
Press the Start/Pause button.
NOTE
• Use the manufacturer's recommendations on
the detergent or fabric softener package when
setting the ezDispense amounts for a standard
4-6 kg load.
• Most cycles will automatically use the default
amounts you have set, indicated by the Normal
LED light on the Dispenser 1 and Dispenser 2
buttons.
• The Delicates and Tub Clean cycles turn the
ezDispense function off by default.
Changing Default Dispense
Amounts
The default settings are configured to dispense 42
ml of detergent and 30 ml of softener for 4-6 kg of
normally soiled laundry.
OPERATION
37
*1
Dispensed Amount
More (110%)
Normal (100%)
Less (90%)
Off (0%)