Extra Options And Functions - LG T2312VSAV Owner's Manual

OPERATION
24
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
Customising a Washing
Programme
Each programme has default settings that are
selected automatically. You may also customise
these settings using these buttons.
Soil Level
Use this option to select the wash strength.
• Press the Soil Level button repeatedly until the
desired soil level is selected.
Water Level
This appliance detects the amount of laundry
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press Water Level option to adjust water level.
• When you select a wash programme, the water
level will be shown on the control panel.
• When water level is automatically detected, it
may differ depending on the amount of laundry
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash button until the desired wash time is
selected.
Rinse
Use this option to change the number of rinses.
• Press Rinse button to change the number of
rinses.
• When the Rinse option is selected,
• If selecting the maximum number of rinses, then
this option is deactivated.
NOTE
• This option is only available on some
programmes.
Spin
Use this option to change the spin strength. When
you press the START/PAUSE button after selecting
this option, the remaining time is indicated on the
display.
To Use the Air Dry Function
When you select Air Dry, you can reduce the drying
time by minimizing the moisture that remains
within the clothes.
• Press the Spin button for 3 seconds to select and
press the POWER button to deselect.
NOTE
• Always keep the laundry amount to 2 kg or less
and make sure to redistribute the laundry
evenly.
• Select 60 minutes for cotton laundry and 120
minutes for synthetic fibre laundry for effective
moisture reduction.
Using Basic Options
Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Delay button to set the required
delay ending time.
l icon is lit.
4
Press the START/PAUSE button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running