Note: After selecting temperature alert values, use the next step to arm or disarm
individual alerts.
Temperature Alerts ON/OFF
• In normal mode, hold then release the ALERT button to toggle between:
o Outdoor HI
o Outdoor LO
o Indoor HI
o Indoor LO
• Press the ▲ button to arm the selected alert.
• The alert icon (bell) appears next to the alert, when the alert is active.
• Press the ▼ button to disarm the selected alert.
Note: When no temperature alerts are set, the Temperature Alert area will show OFF.
Temperature Alert Sounds
When temperature alert sounds, the corresponding alert icon (bell) will flash.
•
The alert beeps once every minute, until the temperature is out of alert range.
•
Press any button to stop alert. The alert symbol will still show.
•
Turn alert OFF: In normal mode, hold and release the ALERT button to select the
•
alert. With HI or LO alert selected, press the ▼ button to disarm that alert.
Weather Station
Power Requirements
• This weather station is powered by a 5 volt AC power adapter
• Alternatively, optional 3-AAA Alkaline batteries may be used.
12-Hour or 24-Hour time format
• Time can display in 12-hour (am, pm) or 24-hour format.
• Default is 12-hour time.
• Use the
Program Menu
Fahrenheit/Celsius
• Use the
program menu
Backlight
AC adapter: The backlight is on continuously when operating the weather station with the
5-volt AC adapter.
Note: When the AC adapter is NOT in use, the HI-LOW-OFF light feature is not available.
• HIGH: The backlight is defaulted to HI at setup when the AC adapter is in use.
• LOW: Press the HI-LOW-OFF button to dim the backlight.
• OFF: Press the HI-LOW-OFF button again to turn the backlight off.
• Press the HI-LOW-OFF button to return to full strength.
La Crosse Technology, Ltd.
to switch time formats.
to switch between Fahrenheit and Celsius.
www.lacrossetechnology.com/support
Page 10