Storage Drive Tray - Lenovo Legion T5 26AMR5 90RB User Manual

Table of Contents

Advertisement

5. Remove the storage drive and bracket.
6. Bend the storage drive bracket to release the screws.
7. Remove the 3.5-inch storage drive from the storage drive bracket.
8. Perform the removal procedure in reverse to reinstall a new CRU.

Storage drive tray

Prerequisite
Before you start, read Appendix A "Important safety information" on page 41 and print the following
instructions.
Replacement procedure
1. Remove the power cord. See "Power cord" on page 22.
2. Remove the right side cover. See "Left side cover and right side cover" on page 23.
3. Remove the 3.5-inch storage drive and bracket. See "3.5-inch storage drive" on page 26.
4. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the left side cover is against the surface and the right side cover is facing up.
5. Remove the screws from the bottom of the computer case.
.
Chapter 5
CRU replacement
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents