Using the HP 3D Active Shutter Glasses
Your 3D experience begins with active 3D content and the 3D glasses, designed to fit over most
standard prescription glasses. The 3D glasses are battery powered and linked wirelessly to the
infrared (IR) emitters in your 3D computer.
WARNING!
NOTE:
For optimal 3D viewing, sit within approximately 1.5 meters (5 feet) of the computer display.
This distance varies depending on your viewing angle.
When watching stereoscopic 3D images, do not incline your head relative to the horizontal direction
of the images.
Keep the areas immediately around the IR emitters free from obstructions. For information on the
location of the IR emitters, see
NOTE:
Before using the glasses, remove the clear protective film from both sides of the lenses
(select models only).
Identifying the 3D glasses components
Component
(1)
Battery compartment
NOTE:
(2)
Nose pieces (3)
NOTE:
and two additional nose pieces are included with the glasses.
Before using the 3D glasses, read the
Getting to know your computer on page
The battery is preinstalled and may include a protective tab. If so, pull the tab to remove it.
The 3D glasses come with 3 nose pieces in different sizes. One nose piece is installed at the factory,
3D safety information on page
26.
Using the HP 3D Active Shutter Glasses
14.
17