Mitsubishi Electric MUZ-FS06NAH-U1 Service Manual page 50

11-2. MUZ-FS15NA MUZ-FS15NAH MUZ-FS18NA MUZ-FS18NAH
NOTE: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws of the service panel.
(2) Remove the screws of the top panel.
(3) Remove the screw of the valve cover.
(4) Remove the service panel.
(5) Remove the top panel.
(6) Remove the valve cover.
(7) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(8) Remove the screws of the cabinet.
(9) Remove the cabinet.
(10) Remove the screws of the back panel.
(11) Remove the back panel.
Photo 2
Screws of the top panel
Screws of
the cabinet
Screws of
Screw of
the service panel
the valve cover
OBH873A
Photo 1
Screws of
the cabinet
Photo 3
Photo 4
Screws of the
back panel
50
PHOTOS/FIGURES
Screws of the top panel
Screws of the conduit cover
Screw of the conduit plate
Screws of
the cabinet