Table of Contents
Advertisement
Quick Links
Instruction Manual
Battery crimping tool HL-45B
Instruction Manual
Battery crimping tool HL-45B
Due to continuing improvements, actual product may differ slightly from
the product described here in.
_________________________________________________________
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL
___________________________________________________________________
Advertisement
Table of Contents
Related Manuals for Hewlee HL-45B
Summary of Contents for Hewlee HL-45B
- Page 1 Instruction Manual Battery crimping tool HL-45B Instruction Manual Battery crimping tool HL-45B Due to continuing improvements, actual product may differ slightly from the product described here in. _________________________________________________________ Read this material before using this product. Failure to do so can result in serious injury.
-
Page 2: Limited 1 Year Warranty
SAVE THIS MANUAL LIMITED 1 YEAR WARRANTY Keep this manual for the safety warnings and precautions, assembly, operating, We make every effort to assure that its products meet high quality and durability inspection, maintenance and cleaning procedures. Write the month and year of standards, and warrants to the original purchaser that this product is free from purchase. -
Page 3: General Safety Rules
PLEASE READ THE FOLLOWING CAREFULLY GENERAL SAFETY RULES THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO REFERENCE TOOL ONLY. NEITHER MANUFACTURER READ CARFULLY THE DIRECTIONS FOR USE AND TO FOLLOW THE DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY... -
Page 4: Personal Safety
The best temperature for charging is between 10℃ - 40℃. Make sure MAINTENANCE AND SERVICING the air hole of the battery and charger are uncovered during charging. Please pull out the plug when meet a bad weather. The tool earns a high precise design, please use it properly and do not disassemble Please do not burn the battery or make it being short-circuited, it may it by unprofessional person, otherwise we will not responsible for the problems cause cause explosion. -
Page 5: Specific Safety Rules
UNDERSTAND YOUR TOOL SPECIFIC SAFETY RULES HL-45B for cutting Cu/Al cable and armored cable. It carries more advantages of Maintain labels and nameplates on the tool which carry important safety high efficiency, easy operate, automatic retract, 360° rotary cutting head, ETC. It is information. -
Page 6: Description Of Components
The crimping process can be interrupted at any moment by releasing the trigger. Do not put your fingers into the head of the tool during operating. Your fingers could be pinched very severely. HL-45B OPERATION PROCESS Parts No. Description Function... -
Page 7: Function Description
3. Function description The battery can be used for hundreds of times, when the life span reduced obviously, change to a new battery please. MCU - automatically detect the pressure during operation and provide security protect, shut off the motor and reset automatically after Please charging the battery in time to avoid it to be used up absolutely;... - Page 8 In addition we see a lower power weight ratio with 50% more capacity and OPERATING INSTRUCTION shorter charging cycles compare to Ni-MH batteries. Please check carefully before operating. Make sure the tool is complete and has no A Temperature sensor makes the tool stop working automatically damage part.
Need help?
Do you have a question about the HL-45B and is the answer not in the manual?
Questions and answers