Table of Contents
Advertisement
MAGNAVOX and SMART. VERY SMART are registered trademarks of
Koninklijke Philips N.V. and are used underlicense from Koninklijke
Philips N.V.
ATTACH YOUR RECEIPT HERE
Purchase Date ____________Serial Number (
Questions, problems, missing parts? Contact technical support department at
800-752-5262, 9:00 a.m. - 5 p.m., CST, Monday - Friday or visit us online at
www.magnavox.com
Please have your model and serial number ready
REV1-061620
INFRARED QUARTZ
) __________________
located on back of unit
1
HEATER
model #MVH-2000
MVH-2000 DE
MVH-2000 WW
Advertisement
Table of Contents
Related Manuals for Magnavox MVH-2000
Summary of Contents for Magnavox MVH-2000
- Page 1 INFRARED QUARTZ HEATER MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips N.V. and are used underlicense from Koninklijke Philips N.V. model #MVH-2000 MVH-2000 DE MVH-2000 WW ATTACH YOUR RECEIPT HERE Purchase Date ____________Serial Number ( ) __________________...
-
Page 4: Safety Information
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate, or install the product . IMPORTANT SAFETY INSTRUCTIONS WARNING: POTENTIAL ELECTRICAL HAZARD IF NOT ADHERED TO . When using electrical appli- ances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: •... - Page 5 SAFETY INFORMATION Child Safety Lock Feature Press and hold the child lock button located on the control panel for 5 seconds or remote control for 3 seconds . Locking is confirmed when a buzzer rings and the control panel displays “CL” . When locked, the control panel and remote control (if provided) will not function .
-
Page 8: Frequently Asked Questions
FREQUENTLY ASKED QUESTIONS Please review these frequently asked questions on the next few pages prior to using your heater . Q. My heater emits a strange odor when I first open the box and when I turn the heater on for the first time. - Page 9 FREQUENTLY ASKED QUESTIONS Q. The temperature on my heater does not match the temperature display on my wall, or external thermostat. Why? A. This is completely normal . The temperature display on your heater may vary from the temperature display on another thermostat (like the one mounted to your wall or a purchased external thermostat) . This is because the temperature sensor on the heater reads the temperature directly around the heater .
-
Page 10: Troubleshooting
PREPARATION Place the heater on a firm, level surface and plug into a grounded 120 V, 60 Hz power outlet and turn on the power switch on the rear of the unit . Only operate heater in upright position . Insert two AAA batteries into the remote control before using (batteries not included) . -
Page 11: Control Panel
CONTROL PANEL PART NAME DESCRIPTION Fan Indicator Light Indicates when the Fan is on Timer Indicator Light Indicates when the timer function is active Digital Display Readout of the set room temperature or timer value Celsius Indicator Light Indicates that the temperature is being displayed in Celsius Fahrenheit Indicator Light Indicates that the temperature is being displayed in Fahrenheit Power Indicator Light Indicates when the unit is receiving power from the wall outlet... -
Page 12: Remote Control
REMOTE CONTROL PART NAME DESCRIPTION Temp Up Button Increases the set temperature value Mode Button Toggles between the three heat modes available Temp Down Button Decreases the set temperature value Power Button Powers the heater on or off Short press: Shows Ambient temperature . Ambient/Lock Button Long press for 3 seconds to activate lock function . - Page 13 OPERATING INSTRUCTIONS 1 . Turn the heater on or off by pressing the Power button on the control panel (C) or by pressing the ON/OFF button on the remote control (B) . Once the power is off, heating elements will stop working first .
- Page 14 OPERATING INSTRUCTIONS 4 . To set the timer power off, start the unit and press the Timer button on the control panel (C) or remote control (B) . Note: The timer-power-off function can only be set when the heater is in power-on mode . The digital display on the control panel (C) changes from the set temperature readout TIMER...
-
Page 15: Care And Maintenance
CARE AND MAINTENANCE WARNING: Before performing any maintenance task, turn off the power switch in the rear of the unit, unplug the unit, and allow it to cool completely . 1 . To keep the heater clean, clean the outer shell with a soft, damp cloth . Use a mild detergent if necessary . -
Page 16: One-Year Limited Warranty
ONE-YEAR LIMITED WARRANTY The manufacturer warrants this heater against defects in materials and workmanship on functional parts, for a period of 1 year from the original date of purchase . Your sales receipt showing the date of purchase of the product is your proof of purchase . Keep it in a safe place for future reference . This war- ranty is subject to personal use only, commercial or rental applications will not be covered . -
Page 17: Replacement Parts List
REPLACEMENT PARTS LIST , 8:00 a.m. - 5 p.m., For replacement parts, call our technical support department at 800-752-5262 CST, Monday - Friday PART DESCRIPTION PART # Control panel COPA-H2018 FAN-DC Power board POBO-H2018 Limit switch LIMITSW130 Infrared tube QUAR-R185 Thermostat Wire SENSOR Master Power Switch... - Page 18 PLEASE REMEMBER TO REGISTER YOUR WARRANTY: www.magnavox.com web: Printed in China MAGNAVOX and SMART. VERY SMART are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V.