Magnavox MVH-2000 Manual page 13

OPERATING INSTRUCTIONS
1 . Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing
the ON/OFF button on the remote control (B) .
Once the power is off, heating elements will
stop working first . The fan will continue work-
ing for up to 90 seconds to dispense residual
heat inside the heater . This is a normal func-
tion .
2 . Select a heat setting by pressing the HEAT
button on either the control panel (C) or the
remote control (B) to toggle between the three
heat settings .
Power for heat-up mode is 1,500 W; heat-down
is 750 W . ECO mode is an Economic Energy
Saving Function . When ECO mode is chosen,
the heater will operate to maintain a constant
warm 68°F
3 . Set the temperature by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C . Once you have chosen the de-
sired temperature, the heater will remain on
until the room temperature increases to the
temperature on the digital display . The heat-
er will cycle on and off to maintain the desired
room temperature .
To view the ambient temperature short press
the ambient temperature button on the control
panel (C) or remote control (B) .
Note: To switch
Celsius, press and hold the ambient
temperature button on the control panel
(C) for 5 seconds .
Note: To engage the child lock on the remote (B),
press and hold for 3 seconds . Deactivate
the lock by repeating these steps .
between Fahrenheit
1
C
2
C
HIGH
3
C
and
C
13
B
B
LOW ECO
B
OR
B