Harsper HP-4200V Owner's Manual page 8

Hide thumbs Also See for HP-4200V:
Table of Contents

Advertisement

Precaution
POWER
Use only the accessory cord designed for this product to prevent
shock. The power supply voltage rating of this product is AC100-
240V, the power cord attached conforms to the following power
supply voltage. Use only the power cord designated by our dealer
to ensure Safety and EMC. When it is used by other power supply
voltage, power cable must be changed. Consult your product
dealer.
Unplug the Monitor from the wall outlet and
disconnect the antenna or cable system during a
lightning storm or when left unattended and unused
for long periods of time. This will prevent damage to
the unit due to lightning and power-line surges.
Do not touch the plug with wet
hand.
- It can make an electric
shock.
Protect the power cord. Power supply cords should be
routed so that they won't be walked on or pinched by
objects placed on or against them. Pay particular
attention to cords at plugs, convenience receptacles,
and the point where they exit from the unit.
Use only a grounded or polarized outlet.
For your safety, this Monitor is equipped
with a polarized alternating current line
plug having one blade wider than the
other. This plug will fit into the power
outlet only one way. If you are unable to
insert the plug fully into the outlet, try
reversing the plug. If the plug still does
not fit, contact your electrician to replace
your outlet.
7
Unplug the Monitor from the wall outlet
before cleaning. Use a damp cloth; do not
use liquid or aerosol cleaners.
Protect the power cord. Power
supply cords should be routed so
that they won't be walked on or
pinched by objects placed on or
against them. Pay particular
attention to cords at plugs,
convenience receptacles, and the
point where they exit from the unit.
CAUTION
OWNER'S MANUAL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hp-4250vHp-5000vHp-5500vHp-6300vHp-500v

Table of Contents