Nokia TA-1288 Get Started

Get Started
Nokia xx
TA-1288/TA-1283
1. Insert the SIM and memory
card
1. Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2. Put the nano-SIM in the SIM slot on the tray with
the contact area face down.
3. If you have a dual-SIM phone, put the second SIM
in the SIM2 slot.
Tip: To find out if your phone can use 2 SIM cards,
see the label on the sales box. If there are 2 IMEI
codes on the label, you have a dual-SIM phone.
4. If you have a memory card, put it in the memory
card slot.
5. Slide the tray back in.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may
damage the card and the device and corrupt data
stored on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
HQ60721870000 V1.0
xxxxxxxxxx
Flash
Fingerprint
sensor
Loudspeaker
Microphone
EN
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
SIM and memory card
slot
Google Assistant/
Google Search key*
USB connector
*Google Assistant is not available in certain languages
and countries. Where not available, Google Assistant is
replaced by Google Search. Check availability at
https://support.google.com/assistant.
2. Charge the battery and switch
Earpiece
Camera
Proximity sensor
Microphone
Front camera
Volume keys
Power/Lock key
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB-C cable. You can also charge your
phone from a computer with a USB cable, but it may
take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
USB-C USB micro-B
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
Headset
connector